Answer
What should I inspect after the first rain following a Starlink installation?
Check the building entry and accessible indoor equipment for moisture, then compare the mount and cable route with the installation photographs. The purpose is to spot a sealing or routing issue early, before it becomes a recurring fault.
Look for water marks around the entry, a cable that channels water towards the wall, strain on connectors or movement in an accessible mount. On a flat roof, ask the installer to confirm that the arrangement has not obstructed drainage.
Do not climb onto a wet roof or unplug wet electrical connections to investigate. If water has reached powered equipment, stop using the affected equipment and arrange safe professional attention.
Record where and when the moisture appeared and send clear photographs to the installer. If the connection dropped during rain but there is no visible ingress, also record app events; a weather interruption and a leaking installation are different problems requiring different responses.
Related guide
How to Install Starlink on a Flat Roof: Ballast, Clearance and Cable-Entry Checklist
Reference
Official Starlink Standard 4 X installation guidance (model-specific). Equipment features and procedures vary; use the instructions for your exact model.
Reviewed 25 October 2026. Practical checklists are Starlink Tips editorial guidance, not claims of hands-on testing.
Get One Month of Starlink Free
Eligible new customers can receive a service credit for their second month when ordering through this referral link. Check the current offer and eligibility at Starlink checkout. Starlink Tips may receive a referral reward.