Get One Month of Starlink FreeSPECIAL OFFER: GET A FREE MONTH OF STARLINK >
A contemporary workspace showcasing a laptop, tablet, and smartphones, ideal for tech and freelance use.

Replace a Phone Used for Starlink Sign-In: A Safe Handover Checklist

Tips & Tricks

Back to Tips & Tricks

Moving to a new phone can interrupt access to Starlink even when the dish continues working. Do the account handover while the old phone and another internet connection are still available.

Work through the setup

Step 1

Check the account email, mobile number and password before wiping the old phone. Confirm you can access the email inbox independently.

Step 2

Install the official Starlink app on the new phone and sign in. Keep both devices available until a fresh login succeeds.

Step 3

Check whether your password manager has synchronised the passkey. If not, create a new credential using the supported account controls.

Step 4

Test a sign-out and sign-in on the new device. A copied app that is already logged in does not prove recovery works.

Step 5

Review the account's passkeys. Remove a credential tied to a discarded device only after you have confirmed the replacement works.

Step 6

Update private recovery notes and then erase the old phone through its manufacturer's process. Keep shared Wi-Fi instructions separate from account credentials.

Worked example

Suppose the new phone appears ready because the transferred Starlink app opens normally. Its session may have been copied or restored, while a later sign-in still needs an unavailable email inbox. Test authentication from a signed-out state while both phones remain usable. Keep the old device until email, password-manager access and the new passkey route have each been checked. Then remove credentials that belong only to the discarded device.

Interpret the result

  • Fresh login works: Continue the device handover.
  • App opens but login fails: Treat the copied session as temporary access.
  • Old device is already unavailable: Use the verified account-recovery process.

Checks and limitations

Perform the test without depending on the old phone's unlocked browser. If the new device cannot authenticate, resolve that before travelling or disposing of your existing device.

What should I test before wiping the phone I use for Starlink?

Complete a fresh Starlink login on the replacement phone and check access to your recovery email. Confirm any passkey is available there, or create another supported credential. Remove old credentials only after the new sign-in route works.

Sources and review

Official documentation for this guide

Reviewed: 11 November 2026. The practical sequence and worked example are Starlink Tips editorial guidance. Check current instructions for your hardware, software and country.

Illustrative photograph: A contemporary workspace showcasing a laptop, tablet, and smartphones, ideal for tech and freelance use. Credit: Negative Space.