Get One Month of Starlink FreeSPECIAL OFFER: GET A FREE MONTH OF STARLINK >
A countryside farm beneath dramatic storm clouds before rain

Starlink Drops During Heavy Rain? Separate Weather Effects From Other Faults

Troubleshooting & Fixes

Back to Troubleshooting & Fixes

Heavy rain can cause a short Starlink interruption, but it should not automatically be treated as the only possible cause. A useful diagnosis compares the timing of the weather with the app alert, power, local network, cables and sky view.

This guide gives you a repeatable order of checks so you can tell a weather-limited service from a fault that will remain after the clouds clear.

Quick answer

  • A brief interruption that starts during heavy rain, snow, hail or high wind and recovers as conditions improve can be weather-related.
  • If the connection stays down after the weather has cleared, check the Starlink app, power, cable connections and obstructions instead of waiting indefinitely.
  • If only one phone or computer is affected, test the device or local Wi-Fi before blaming the dish.
  • Do not work outside, climb, or handle outdoor connectors during lightning or unsafe weather.

1. Record the event before changing anything

Write down the time the problem began and what was happening at the time:

  • Was the rain light, steady or very heavy?
  • Were there strong gusts, hail, snow or ice?
  • Did every device lose internet access, or only one?
  • Did the Starlink Wi-Fi network disappear, or did Wi-Fi remain connected without internet?
  • What alert or recent interruption does the Starlink app show?
  • Did the router, power supply, UPS or generator restart?

Avoid repeated reboots while you are collecting this information. Each reboot changes the conditions and makes it harder to compare the event with the weather.

2. Retest after the worst weather passes

Wait until the heaviest rain or wind has moved through, then repeat the same simple test on the same device. Open a familiar website or run the same small check you normally use.

A short recovery soon after the weather improves supports a weather-related explanation. Starlink says moderate to heavy rain, snow and hail can cause momentary dropouts, and that service should normally return as conditions pass.

A service that remains unavailable in clear conditions needs a wider diagnosis. Do not keep power-cycling the equipment just to see whether the problem has gone away.

3. Separate a dish problem from a local network problem

Test two devices if possible:

  1. Check a phone near the Starlink router.
  2. Check a second phone or computer.
  3. If your setup supports Ethernet, test one wired device.
  4. Confirm that the device is actually connected to the Starlink network rather than mobile data or another saved Wi-Fi network.

Use the result to narrow the fault:

  • One device fails while others work: investigate that device, its Wi-Fi connection, VPN, DNS or browser.
  • Wi-Fi remains available but all devices lose internet: investigate the Starlink connection, power and app alerts.
  • The Wi-Fi network disappears completely: investigate the router, power supply, UPS or local cabling first.

4. Check power and cable connections when it is safe

Look for a power event indoors. A UPS or generator may have transferred between sources, tripped, or restarted the router even though other household devices appear normal.

After the weather has passed, and only if the connections are safely reachable:

  • Confirm the router and power supply are receiving power.
  • Check that the Starlink cable is fully seated at each end.
  • Look for visible damage, sharp bends, standing water or a connector that has been pulled sideways.
  • Do not unplug or handle an exposed outdoor connector while it is wet or during lightning.
  • Do not add an improvised cover over the dish; Starlink warns that a cover can degrade performance and interfere with snow-melt operation.

If a connector or cable shows water ingress or physical damage, stop testing and contact Starlink support. Avoid sealing a damaged connection with a quick fix that could make later inspection harder.

5. Check for new obstructions or movement

Weather can create a new obstruction without moving the dish itself. Wet leaves, fallen branches, snow or ice can block part of the field of view. Strong wind can also move a mount, loosen a bracket or pull on a cable.

When it is safe to do so:

  • Use the Starlink app's obstruction check and compare it with an older scan if you have one.
  • Inspect from the ground for branches, debris or snow around the dish.
  • Look for obvious movement or a mount that no longer sits as it did before the storm.
  • Do not climb onto a roof or use a ladder during wet, windy or icy conditions.

Clear only loose material that you can reach safely. Do not scrape the dish or put a cover over it.

6. Decide whether the weather is the explanation

Use the pattern, not a single speed test:

  • Drops occur only during the most severe weather and recover soon after: record the event and monitor it.
  • Drops happen in ordinary rain or continue long after the weather clears: investigate power, cables, obstructions and service alerts.
  • Drops recur after wind and the dish or mount has visibly moved: treat the installation as the priority.
  • All devices fail while the app reports recent interruptions: save the timestamps and wait for a clear-weather retest before changing hardware.
  • One device fails while the rest of the network works: continue with local network troubleshooting.

The goal is not to prove that rain never affects Starlink. The goal is to avoid replacing a cable, router or dish when the pattern is a brief weather interruption, and to avoid dismissing a persistent fault as weather when it is not.

7. What to send Starlink support

If the problem continues in clear weather, prepare a concise record:

  • Date, local time and duration of each interruption
  • Weather conditions at the start and end
  • Whether every device was affected
  • The exact Starlink app alert or recent-interruption message
  • Any power, UPS or generator event
  • What you observed about the cable, mount and obstruction scan
  • Whether service recovered without a reboot

Do not include your Starlink password or unnecessary account screenshots. A short timeline is usually more useful than a folder of unrelated speed-test images.

Lightning and personal safety

Do not inspect, climb to, or disconnect outdoor equipment during lightning or dangerous weather. Starlink's weather guidance recommends unplugging from the wall and disconnecting the Starlink cable for additional protection during a lightning storm, but only do this when you can do so safely from a dry, stable position.

Official references