Get One Month of Starlink FreeSPECIAL OFFER: GET A FREE MONTH OF STARLINK >
Close-up of a yellow Ethernet cable with connectors on a blue background.

Find a Second DHCP Server on a Starlink Home Network

Troubleshooting & Fixes

Back to Troubleshooting & Fixes

Intermittent wrong addresses can follow an old router being added as a Wi-Fi extender. Investigate who assigns addresses before resetting the dish.

Work through the setup

Step 1

List every router, access point and server connected to the LAN. Include spare equipment that was recently plugged in.

Step 2

On an affected client, record its IP address, gateway, subnet mask and DNS server. Compare those details with a working client.

Step 3

Identify the intended DHCP server. Check whether an added router still has its own DHCP service enabled on the shared LAN.

Step 4

Disconnect the suspect added device during an agreed test window. Renew a test client's address and see whether the correct network settings return.

Step 5

Reconfigure the extra device through its supported Access Point mode where appropriate. Avoid overlapping static addresses and the lease pool.

Step 6

Reconnect one device at a time and test fresh client leases. Save the final addressing plan with the wiring diagram.

Worked example

Suppose clients sometimes receive one gateway address and sometimes another after an old router is connected. Photograph the cabling and compare a fresh address lease with that router disconnected. If the intended address returns, reconfigure the added device through its supported mode before reconnecting it. Keep static device addresses outside the dynamically assigned pool.

Interpret the result

  • Wrong gateway appears intermittently: Look for a second DHCP service.
  • One static address conflicts: Correct the address plan.
  • Problem remains after removing the extra router: Inspect other servers and switches.

Checks and limitations

Do not run two uncoordinated DHCP servers on one ordinary home LAN. On managed networks, use the switch vendor's supported protections only after identifying the trusted server and confirming compatibility.

Sources and review

Official documentation for this guide

Reviewed: 11 November 2026. The practical sequence and worked example are Starlink Tips editorial guidance. Check current instructions for your hardware, software and country.

Illustrative photograph: Close-up of a yellow Ethernet cable with connectors on a blue background. Credit: Ann Hannes.