Get One Month of Starlink FreeSPECIAL OFFER: GET A FREE MONTH OF STARLINK >
Business professional printing a document in an office environment.

Use an Ethernet Printer With Starlink and Keep AirPrint Working

Tips & Tricks

Back to Tips & Tricks

An Ethernet-capable printer can stay wired to your home network while phones and laptops print over Wi-Fi. You do not need the printer itself to use Wi-Fi, provided the wired and wireless devices share a network that allows local communication.

This is particularly useful when an older printer struggles to join Wi-Fi or a printer sits beside an existing network switch.

Check the printer and the Starlink connection

Look for a network Ethernet socket on the printer; a USB socket is different. Check the printer manual for Ethernet support and, for iPhone or iPad printing, AirPrint support.

Your Starlink kit also needs a usable LAN connection. The connection method depends on the kit: some provide Ethernet directly, while Standard Actuated equipment needs its compatible Ethernet adapter. A third-party router can provide LAN ports too.

Connect through the LAN

Run Ethernet from the printer to a LAN port on your router or to a switch already connected to that LAN. Do not plug it into the router's internet/WAN port.

On the printer, select wired networking if its instructions require it. Some printers disable Wi-Fi when Ethernet is active. Let the printer obtain its address automatically, then print its network status page.

Keep the computer or phone on the main Wi-Fi attached to the same router. A different Wi-Fi name can still belong to the same LAN, while a guest network or VLAN may isolate devices despite sharing the same internet connection.

Add and test the printer

Use your operating system's normal add-printer screen. Select the correct model and manufacturer-supported driver or protocol. On an iPhone or iPad, open a printable document and look for the AirPrint printer selector.

Print a short test page before sending a large job. Then restart the printer once and repeat the test. This checks whether discovery returns after a normal restart.

If AirPrint cannot find the wired printer

Confirm that the printer supports AirPrint, is awake and has a valid local network address. Check that the phone is on your trusted LAN rather than an isolated guest SSID.

If a VPN is active, check whether its settings allow local-network access. Restore your normal settings after testing. On managed networks, discovery between VLANs may need deliberate multicast configuration and firewall permissions; moving both devices onto the same trusted LAN is a simpler diagnostic test.

Adding a printer by IP address on a computer can help distinguish a discovery problem from a connection problem. It does not automatically fix AirPrint discovery on an iPhone.

A practical example

A printer wired to a switch and a phone connected to a UniFi access point can communicate when both switch ports and the Wi-Fi network belong to the same LAN. If the phone is on guest Wi-Fi, internet browsing may work while the printer stays invisible.

Correct the local network assignment before replacing the printer or buying a different Starlink router. Keep printer administration private and follow manufacturer instructions for firmware updates.

Sources and next steps

Reviewed 12 November 2026. See Apple's AirPrint instructions and Starlink's third-party networking guidance. For wireless setup, use our printer connection guide.

Quick answer

Can my printer use Ethernet while my phone uses Starlink Wi-Fi?