
How to Identify Your Starlink Kit Before Buying Cables, Adapters or Mounts
Equipment & Accessories
Different Starlink kits can use different cables, router ports, power arrangements and mounting hardware. The safest time to identify your kit is before ordering an Ethernet adapter, replacement cable, mount or power accessory.
This guide gives you a repeatable way to identify what you own without relying on a seller's listing, a familiar-looking dish or a generation label that may be used loosely.
Important: Starlink hardware names, included accessories and compatibility can change by country and over time. Use the model, serial or kit information from your own equipment and confirm the current instructions for that exact kit before buying anything.
Start with the complete kit
Do not identify the dish in isolation. Put these items on your list:
- Dish or outdoor terminal
- Router
- Power supply, if it is a separate unit
- Cables and their connector ends
- Mount or stand
- Any Ethernet adapter, router adapter or other inline accessory
Take clear photos of each label and connector. Keep the photos private because labels can contain serial numbers, MAC addresses or other identifiers.
Check the Starlink app first
If the system is working, open the Starlink app while your phone is connected to the Starlink network.
Look for the device, account or network information screens that show a hardware name, model, serial number or kit identifier. Menu names vary by app version, so record the exact wording rather than translating it into a guessed generation.
Write down:
- The hardware name shown by the app
- Dish or router serial number, if displayed
- Kit or product identifier, if displayed
- Router software version
- Whether the app shows an Ethernet, bypass or third-party-router option
The app is a useful cross-check, but it is not the only evidence. If the app name is generic or unavailable, continue with the physical labels.
Photograph every label
Power down only when the equipment instructions say it is safe to do so, then read the labels on the router, power supply and dish.
Record:
- Manufacturer and model
- Input and output ratings on the power supply
- Regulatory model or product number
- Serial number
- Connector or port markings
- Any revision, generation or regional suffix
Do not open a power supply or remove sealed covers to find a label. If a label is underneath equipment that is mounted outdoors, photograph it from a safe position or ask an installer to inspect it.
A label with a familiar family name is not enough on its own. The model number, included router and connector arrangement are more useful when checking an accessory.
Inspect the cable ends without forcing them
Look at both ends of every cable and record what each end connects to. Do not pull hard, twist a weather seal or use a random Ethernet coupler just to see whether it fits.
Note:
- Which cable runs to the dish
- Which cable runs to the router or power supply
- Whether the ends are the same or different
- Whether a separate adapter is already installed
- The approximate cable length and whether it is indoor or outdoor rated
- Any damage, tight bend, crushed section or water exposure
A connector that fits physically is not proof that the cable is electrically or mechanically compatible. Starlink cable and adapter requirements can differ between kits. Check the exact model against current Starlink instructions before ordering a longer or replacement cable.
Use the router and power path as a cross-check
The router often provides the quickest clue about which accessories you need, but it should be used with the label and app information.
Record:
- The number and type of visible network ports
- Whether the power input is on the router or a separate power unit
- Whether a separate Ethernet adapter sits between the router and dish cable
- Whether the router is the unit supplied with this dish or was added later
- Whether a third-party router is currently connected
Do not assume that an Ethernet port, a spare-looking socket or a familiar router shape has the same function on every kit. Use the port description in the current instructions for your exact model.
Build a one-page kit record
Before shopping, make a small record like this:
| Item | What to record | | --- | --- | | Dish | model, serial, connector and mount type | | Router | model, serial, port layout and power input | | Power supply | model, input/output rating and cable connections | | Cables | source, destination, approximate length and condition | | Accessories | adapter model, purpose and where it is installed | | App | hardware name, software version and relevant network options | | Location | country, service address and whether the kit is moving |
This record prevents a common mistake: ordering a part for the dish you remember while owning a different router or adapter.
Match the purchase to the job
Identify the job before choosing the part.
Adding a third-party router
Confirm the exact Starlink router and whether the current instructions support the network layout you want. Decide whether Starlink remains the router or whether a supported bypass arrangement is required. Do not enable bypass mode simply because you have bought another router; it changes how the network is managed.
Read Starlink's third-party router guidance and your router manufacturer's instructions together.
Adding wired devices
Check whether your kit already provides the required Ethernet connection. If you need more wired ports, a network switch may be the right accessory. A switch does not replace a missing compatible adapter, and it does not turn an incompatible port into Ethernet.
See Starlink's network switch guidance before buying a switch or rewiring the system.
Replacing or extending a cable
Measure the complete route, including bends, indoor entry points and a modest service loop. Check the exact cable type, connector and weather requirements for your kit. Do not join cables with an unprotected indoor coupler on an outdoor route, and do not make a cable shorter by pulling the connector tight against a wall or mount.
Use the site's longer cable planning guide for routing and testing considerations.
Choosing a mount
Identify the dish and the mounting interface before comparing brackets. A mount that matches the dish shape may still have the wrong collar, tube size, angle or load rating. Check the manufacturer's current fitting instructions and the condition of the existing stand.
If the kit is second-hand
Ask the seller for clear photos of the dish, router, power supply, cables and labels before paying. Confirm what is included and whether the seller has completed the account and hardware handover steps.
A recognizable dish is not proof that the kit can be activated at your address. Use the site's used Starlink kit checklist and confirm current transfer requirements before treating a low price as a bargain.
When identification is still unclear
Stop before ordering. Send Starlink support the model and serial photos, the app information and a simple diagram showing which cable connects each item. Ask the accessory seller to confirm compatibility with that exact model, not just with “Gen 2”, “Gen 3” or “Standard”.
Do not:
- Force a connector because it almost fits
- Mix power supplies because the plug looks similar
- Cut or splice a Starlink cable
- Open a power supply
- Drill or permanently mount hardware before checking the fit
- Share serial numbers or MAC addresses publicly
Quick checklist
- [ ] I identified the dish, router, power supply and every inline adapter.
- [ ] I recorded model or product numbers from the physical labels.
- [ ] I checked the Starlink app without relying on a guessed generation name.
- [ ] I photographed the connector ends and noted what each cable connects.
- [ ] I measured the real route before ordering a longer cable.
- [ ] I checked the current instructions for the exact kit and country.
- [ ] I confirmed the part for the job I actually want to do.
- [ ] I kept serial numbers and MAC addresses private.
- [ ] I have a recovery plan before changing router or power connections.
Sources and related reading
- Starlink support
- Starlink hardware specifications
- Starlink hardware comparison: Gen 1, Gen 2 and Gen 3
Starlink Tips is independent of Starlink. Hardware names, prices, availability and compatibility can change, so the instructions for your exact kit take priority.