
Starlink Worked in Winter but Drops in Summer: Check Seasonal Trees
Installation & Setup Guides
A dish location that works with bare trees may behave differently after leaves return. Branch growth, moving foliage and changes around the property can alter the view of the sky.
Do not assume every summer slowdown is caused by leaves. Compare Starlink's own obstruction evidence with the interruptions you actually notice before changing a working installation.
Establish what changed
Write down when the problem started and whether it affects all devices. Note new leaves, branch growth, building work or material that has fallen onto the dish. Inspect only from a safe position.
If a computer connected by Ethernet stays online while a distant Wi-Fi device drops, investigate indoor coverage as well. A satellite obstruction and a weak Wi-Fi signal can coexist.
Keep a record of the running map
Save a private screenshot of the obstruction map and relevant outage statistics. Record the date, dish position and the activities affected, such as video calls or gaming.
The phone's pre-installation scan estimates the view from the phone's position. The running dish map comes from the installed system's observations. Do not compare a scan from ground level with a roof installation as though they were the same measurement.
Starlink says most obstructions can be detected in less than a day. Allow the map to build after a move and compare meaningful observation periods rather than judging the new site immediately.
Relate the map to actual interruptions
Some satellite switches around obstructions are imperceptible. A small marked area does not automatically mean you must move the dish or cut a tree.
Look for persistent obstruction warnings and repeated interruptions affecting use. If the map remains clear while every device slows only at busy times, seasonal leaves are not established as the explanation.
Test a more open position
Use the app to check a suitable alternative position before committing to a new mount. For a temporary test, keep the equipment secure and cables protected. Power down before moving and follow your kit's setup instructions when restarting.
Keep other test conditions as similar as practical: same computer, connection method and activities. Record whether the alternative position reduces obstruction-related interruptions.
Plan for the full year
Allow for the mature canopy, future growth and wind movement rather than the bare branches visible on installation day. Moving sideways into a clearer area can be more practical than increasing height.
Higher mounts bring structural and access considerations. Use a competent installer where necessary, and check permissions before work on buildings or trees. Do not climb or cut branches simply because the app shows a coloured patch.
A practical comparison
Suppose a call disconnects repeatedly in the original location and the running map shows a recurring blocked sector near a newly leafy tree. At a secure, more open test position, that sector clears and calls improve over a comparable period. This supports a placement change, although weather and network conditions still vary.
Save the results for your installer. A documented comparison is more useful than buying an untested taller pole.
Sources and related guidance
Reviewed 12 November 2026. See Starlink's obstruction fixes and map interpretation. Start with our app alignment and obstruction guide.
Quick answer
Can new leaves explain why Starlink worked in winter but drops in summer?