Get One Month of Starlink FreeSPECIAL OFFER: GET A FREE MONTH OF STARLINK >
Wireless router and cable representing Starlink hardware and accessories

How to Change Starlink Wi-Fi Name and Password Without Losing Track of Devices

Getting Started

Back to Getting Started

Changing the primary Wi-Fi name or password is simple, but it disconnects every device that uses the old network credentials. A short inventory and a deliberate reconnect order will save you from hunting through cameras, printers and smart-home devices later.

This guide uses model-neutral wording because Starlink app menus and router features vary by hardware and software version.

Before You Change Anything

  1. Choose a quiet time. Avoid making the change during a work call, an upload, a security-camera update or another activity that cannot be interrupted.
  2. Keep one phone or tablet connected to the current Starlink Wi-Fi and signed in to the Starlink app. If you use a separate mesh or third-party router, identify which device actually provides Wi-Fi before changing anything.
  3. Make a short list of devices that need the network: phones, laptops, TVs, printers, cameras, speakers, thermostats, plugs, game consoles and any travel or backup router.
  4. Decide whether you are changing the name, the password, or both. Changing only the password still disconnects every device. Reusing an old password may let people who already know it reconnect, so use a new one when access control is the reason for the change.
  5. Do not use your Starlink account password as the Wi-Fi password. Use a long, unique passphrase that is easy for your household to type but difficult for a visitor or neighbour to guess.

If you have a third-party router in front of Starlink, make the change on that router. If Starlink is in bypass mode, the Starlink router may not be the device broadcasting your household Wi-Fi.

Change the Primary Wi-Fi Details

The exact labels vary, but the flow is usually:

  1. Open the Starlink app while connected to the local Starlink network.
  2. Open the router, Wi-Fi or network settings area.
  3. Select the primary or default Wi-Fi network, then choose its edit or configuration option.
  4. Enter the new network name, also called the SSID, and the new Wi-Fi password. Avoid putting your address, surname or apartment number in the network name.
  5. Save or apply the change and wait for the router to finish updating. Do not unplug the dish or router while the settings are being saved.
  6. Expect the phone or tablet you used for the change to disconnect. Rejoin the new network using the new password, then confirm that a normal webpage loads.

Use the exact capitalization you intend. Wi-Fi names and passwords can be case-sensitive, and an extra space at the end is easy to miss when typing on a phone.

Reconnect Devices in a Safe Order

Reconnect one device at a time and mark it off your list:

  1. Reconnect the phone or laptop you need for administration.
  2. Reconnect the Starlink app and verify that the router and dish are reachable.
  3. Reconnect work computers and phones.
  4. Reconnect printers and other devices you may need to configure from a computer.
  5. Reconnect cameras, alarms and smart-home hubs.
  6. Reconnect TVs, streaming boxes, speakers and game consoles.
  7. Reconnect plugs, bulbs and sensors last.

For each device, check both the Wi-Fi name and the password. A device may appear to be trying to join the new network while silently using an old saved network profile.

If a phone or computer refuses to join, remove or forget the saved profile for the old network, then join the new network again. Do this only for the intended network; forgetting every saved network can create a second problem when you are away from home.

Smart-Home and Older Devices

Some older devices only support 2.4 GHz Wi-Fi or require a temporary setup mode. If a device cannot see the new network:

  • Check whether the router or Starlink app offers a device-compatibility or 2.4 GHz setup option.
  • Put the device into its documented setup mode and add it again through its manufacturer app.
  • Keep the phone used for setup on the same household Wi-Fi as the device when the app asks for local access.
  • If the device still fails, test it close to the router and check its own reset procedure. Do not factory-reset a camera, hub or alarm until you know its account and configuration can be restored.

Printers, cameras and hubs may store the Wi-Fi credentials inside their own app, not in the phone's network list. Updating the phone's Wi-Fi connection will not automatically update those devices.

Guest Wi-Fi Is Separate

Changing the primary network does not necessarily change a guest network. If guests, contractors or short-term visitors should no longer have access, review the guest network separately and rotate its password as well. Do not share the Starlink account password when sharing Wi-Fi access.

If your router uses one combined network name for multiple bands, keep that arrangement unless you have a specific reason to split it. Creating extra network names can make roaming and troubleshooting harder.

If the App Cannot Reconnect

If the new Wi-Fi name is visible but the app cannot reach the router:

  1. Confirm that the phone is joined to the new primary network, not a neighbour's network, cellular data or a guest network.
  2. Move close to the router and retry.
  3. Close and reopen the Starlink app.
  4. Check whether a third-party mesh system or access point is the device handling Wi-Fi.
  5. Reboot only after the new settings have had time to save. A reboot is different from a factory reset.
  6. Treat a factory reset as a last resort because it can erase router settings and require every device to be configured again.

Changing the Wi-Fi name or password does not change your Starlink account, service address, subscription, public IP behaviour or satellite view of the sky. It only changes the credentials devices use to join the local wireless network.

Final Check

Walk through the device list and verify the things that matter most: the Starlink app, one computer, one phone, a printer if you use one, and any camera or alarm system. Then review the router's connected-device list if that feature is available. An old device that remains connected may be using Ethernet, a second access point or a guest network rather than the new primary Wi-Fi.

Keep the new password in your household password manager. Avoid writing it on the router where anyone who can enter the room can read it.